Everybody was wanting me to write a tut on how to do the UMD window mod. Well here it is, but it is ogign to have no pics, because I have already windowed the only PSP I have. If anybody wishes to donate me some money or a UMD door, I can get pics. :icon_bigg Anyways, here is the tut...
1. Follow the guide here to remove the UMD door.
2. Take a small, thin flat head screwdriver, and peel the metal ring up.
3. Go somewhere with alot of light, take you dremel. :humped:
4. Use a jigsaw attachment to cut a small hole in the middle up the big hole you will be windowing.
5. Take you sanding attachment (It should be a circle about 3/4 an inch) and put you Dremel on low speed.
6. With that sanding attachment slowly sand outwards to the line. Sand all the way around, but leave a millimeter or two.
7. Take some sandpaper (120 grit) and sand around inside the line. Untill you get the desired circle.
If you have a PGP case, goto step 10
8. Take some plexi and and get Lowes or Home Depot to cut it to the exact measurments of the PSP window. Take the UMD door in so they can get the measurments.
9. Affix the plexi with some type of glue. That is up to you.
10. Re-attach the UMD door following the same tutorial on the llamma site that I linked to at the top of this tut.
10a. If you have a PGP, you do not need to attach Plexi, because the PGP covers the UMD window. You may still attach plexi if you want.
11. Enjoy :Punk:
EDIT: Here are some pics of the finished product.
http://i61.photobucket.com/albums/h7...t/DSC02260.jpg
http://i61.photobucket.com/albums/h7...t/DSC02261.jpg
